Untitled Document
Home | About Us | Contact
21 Nov 2017
10:37 PM
Go Social :
Untitled Document
     Authors Desk
Detail of This Paper

Year 2015
Authors Sudhansu Ranjan Das , Deepak Kumar Mohapatra , Purna Chandra Routray , Biswaranjan Rout
Broad area Production Engineering
 In today’s rapidly changing state in metal cutting industries, applications of optimization techniques in hard turning processes is essential for a manufacturing unit to replace grinding/finishing operations due to the development of advanced tool materials and rigid machine tools, which can ensure the same accurate geometrical and dimensional tolerances. The complex machining process gets influenced by multiple process parameters, particularly in a finish hard turning operation, which often determines the final quality of the parts. This article presents a brief review of the techniques of modeling and optimization that have significant influence in hard turning. The main objectives of this study investigate and evaluate the effect of different machining parameters on surface roughness, tool wear, tool life, cutting forces, power consumption, material removal rate and cutting temperature and chip morphology during turning of different hard steels with hardness more than 45 HRC.
 [1] S.R. Das, A. Kumar, D.Dhupal, Effect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate during Dry Turning of EN-31 Steel, OPJIT International Journal of Innovation & Research, 2 (2013) 22-29.
[2] G. Bartarya, S.K. Choudhury, State of the art in hard turning. International Journal of Machine Tool Manufacturing, 53 (2012) 1–14.
[3] E. Aslan, N. Camuscu, B. Bingoren, Design optimization of cutting parameters when turning hardened AISI 4140 (63 HRC) with Al2O3+TiCN mixed ceramic tool, Materials & Design 28 (2007) 1618–1622.
[4] A. Bhattacharya, S. Das, P. Majumder, A. Batish, Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA, Prod. Eng. Res. Dev. 3 (2009) 31–40.
[5] D.I. Lalwani, N.K. Mehta, P.K. Jain, Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel, Journal of Materials Processing Technology206 (2008) 167–179.
[6] B. Fnides, M.A. Yallese, T. Mabrouki, J.F. Rigal, Surface roughness model in turning hardened hot work steel using mixed ceramic tool. Mechanika, 3(2009) 68-73.
[7] I. Asiltürk, H. Akkus, Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method, Measurement 44 (2011) 1697–1704.
[8] K. Bouacha, M.A. Yallese, T. Mabrouki, J.F. Rigal, Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool, International Journal of Refractory Metals and Hard Materials 28 (2010) 349–361.
[9] A.K. Sahoo, B. Sahoo, Performance studies of multilayer hard surface coatings TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-II (RSM, greyrelational and techno economical approach, Measurement 46 (2013) 2868–2884.
[10] J. P. Davim, L. Figueira, Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques, Materials and Design 28 (2007) 1186–1191.
[11] R. Suresh, S. Basavarajappa, V.N. Gaitonde, G.L. Samuel, Machinability investigations on hardened AISI 4340 steel using coated carbide insert, International Journal of Refractory Metals and Hard Materials 33 (2012) 75–86.
[12] M.W. Azizi, S. Belhadi, M.A. Yallese, T. Mabrouki, J.F. Rigal, Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel, Journal of Mechanical Science and Technology 26 (2012) 4105-4114.
[13] H. Aouici, M.A. Yallese, K. Chaoui, T. Mabrouki, J.F. Rigal, Analysis of surface roughness and cutting force components in hard turning with CBN tool: prediction model and cutting conditions optimization, Measurement 45 (2012) 344–353.
[14] J.S. Dureja, V.K. Gupta, V.S. Sharma and M. Dogra, Design optimization of cutting conditions and analysis of their effect on tool wear and surface roughness during hard turning of AISI-H11 steel with a coated–mixed ceramic tool. Journal of Engineering Manufacture, 223 (2009) 1441-1453.
[15] T. Özel, T.K. Hus, E. Zerne, Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel, Int. J. Adv. Manuf. Technol. 25 (2005) 262–269.
[16] D. Singh, P.V. Rao, A surface roughness prediction model for hard turning process. International Journal of Advanced Manufacturing Technology 32 (2005) 1115–1124.
[17] J.T. Horng, N.M. Liu, K.Y. Chiang, Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surfacemethodology, Journal of Materials Processing Technology 208 (2008) 532–541.
[18] V.S. Sharma, S. Dhiman, R. Sehgal, S.K. Sharma, Estimation of cutting forces and surface roughness for hard turning using neural networks. Journal of Intelligent Manufacturing, 19 (2008) 473–483.
[19] G.C. Benga, A.M. Arabo, Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools, Journal of Materials Processing Technology143–144 (2003) 237–241.
[20] M.C. Cakir, C. Ensarioglu, I. Demirayak, Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material, Journal of Materials Processing Technology 209 (2009) 102–109.
[21] V.N. Gaitonde, S.R. Karnik, L. Figueira, J.P. Davim, Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts, International Journal of Refractory Metals and Hard Materials 27 (2009) 754–763.
[22] M. Gunay, E. Yucel, Application of Taguchi method for determining optimum surface roughness in turning of high-alloy white cast iron. Measurement, 46 (2013) 913–919.
[23] A. Aggarwala, K. Singh, P. Kumar, M. Singh, Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi’s technique-A comparative analysis. Journal of Materials Processing Technology, 200 (2008) 373-384.
[24] S.K. Shihab, Z.A. Khan, A. Mohammad, A.N. Siddiquee, Cryogenic Hard Turning of Alloy Steel with Multilayer Hard Surface Coatings (TiN/TiCN/Al2O3/TiN) insert using RSM. International Journal of Current Engineering and Technology, 2 (2014) 265-271.
[25] Z. Hessainia, A. Belbah, M.A. Yallese, T. Mabrouki, J.F. Rigal, On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations, Measurement 46 (2013) 1671–1681.
[26] S.R. Das, D. Dhupal, A. Kumar, Experimental Investigation into Machinability of HardenedAISI 4140 steel Using TiN Coated Ceramic Tool. Measurement, 62 (2015) 108-126.


Untitled Document
Copyright ©2017 PICCO Engineering, Cuttack